Sunday, October 10, 2010

Arista Networks Host-Link Aggregation

Setup your server side (I use Broadcom Advanced Control Suite) as you normally would.

On your new shiny Arista 7120T, this is what you need to do:

7120t enable
config t
int et1-4
channel-group 1 mode on

Then run: show int po1
Port-Channel1 is up, line protocol is up
Hardware is Port-Channel, address is xxxx.xxxx.xxxx
MTU is 9212 bytes, BW 40000000 Kbit
Full-Duplex, 40Gb/s
Active Members in this channel: 4
...Ethernet1 , Full-duplex, 10Gb/s
...Ethernet2 , Full-duplex, 10Gb/s
...Ethernet3 , Full-duplex, 10Gb/s
...Ethernet4 , Full-duplex, 10Gb/s

5 minutes input rate 0 bits/sec (0%), 0 packets/sec
5 minutes output rate 0 bits/sec (0%), 0 packets/sec
   0 packets input, 0 bytes
   Received 0 broadcasts, 0 multicast
   0 input errors
   0 packets output, 0 bytes
   Sent 0 broadcasts




Now you're cooking with gas :)


For switch to switch LACP: 


7124-SWB(config)#int et1-4
7124-SWB(config-if-Et1-4)#channel-group 1 mode passive
7148-SWA(config)#int et1-4
7148-SWA(config-if-Et1-4)#channel-group 1 mode active

Once the above sequence is entered and synchronization is complete, the ethernet interfaces 1-4 on each switch are bound to the port-channel.

If you're using another switch with your Arista, the config might be a bit different and you may need to try a few different configs to get it to work correctly.

Friday, October 8, 2010

SSD Goodness

JACKPOT!

Interesting, OWC REALLY enters the fray now.

I can't wait to see Larry release THIS upon the world. My Oracle servers are already drooling over this as they watch me type this over my shoulders. Bring them on!

Monday, October 4, 2010

OWC SQLIO Testing

I just finished the SQLIO testing of the OWC Mercury Extreme Pro RE SSD's.

Platform Details: Dell PowerEdge 6950, 4x Dual-Core AMD Opteron 2.6ghz CPU's, 32GB RAM, Dell Perc 5/i RAID Adapter. RAID details: RAID10, 1MB Stripe Size, Adaptive Read Ahead, Writeback Cache, Windows Server 2008 R2 Standard. I used 4x of the 200GB version of the drive in RAID10 and installed WS2008R2 on that array.

The results were about what I was expecting. See below.






















































The full details are available here.

Thursday, September 30, 2010

OWC SSD Preliminary Testing

Just got in our large order of the OWC Mercury Extreme Raid Edition SSD's (200gb size). While I am waiting on the R910's they are destined for, I threw a few into an older Dell PowerEdge 6950 with quad Dual-Core AMD Opteron 2.6ghz CPU's. I setup a single boot drive and a 4-disk RAID10 group. The RAID settings were set to 1MB stripe size, adaptive read-ahead, and writeback. Went through a normal Windows 2008 R2 Standard installation to run my IOMeter and (soon) SQLIO tests.

The results were pretty good.

Using 4MB IO sizes, they REALLY shined bursting over 2800 MB/s of thruput.




















The details of the test were: 4MB IO size, 50% read, 50% write, 50% random and 50% sequential. The sustained average was a more-sane 1100 MB/s with the same settings.





















Using 4k IO's, I saw over 600 MB/s, which is about what I expected, and the IOPs were good at >50,000.

Not bad for ~$2400 of storage, with a full 5-year replacement warranty.

Stay tuned for further, more detailed testing including SQLIO. I know you SQL Server guys like to see those. I'm running Oracle 11g R2 Enterprise on these 4 right now as a sandbox testing environment. Using these SSD's with Oracle parallel execution has made a GIANT impact on our application performance so far. Keep in mind, we're not a production shop, and no important data was at risk. This is just a "testing the waters" scenario before we move further.

Wednesday, September 15, 2010

10GBase-T is here

You read that right, 10-Gigabit Ethernet over CAT5E or CAT6A, with distance limitations of course, and good cabling.

This is the Arista Networks 7120T-4S 10GBase-T switch. I am anxious to get this installed and tested with the new servers coming in multiple Broadcom 57710 NICs. Hyper-V and ESX should run nicely with 4x 10GBase-T in LACP per physical host.

Now for the pics:








































Sunday, September 5, 2010

OWC SSD in Macbook Pros

I received the two 13" MacBook Pro's and their OWC SSD's yesterday:




















Installation was a snap taking a couple of minutes each:




















After installing Mac OS X 10.6, I saw just how fast these things are. From the "dong" to logged in was only a matter of seconds, maybe 10 seconds from the power-on button.

I setup Bootcamp with Windows 7 X64 Ultimate because the two end-users requested this. After setting that up and installing the appropriate Bootcamp drivers, I updated them and rebooted.

I tried IOMeter  and saw good results, right at what was advertised. Being my curious self, I bumped the IO Size to 4MB and was surprised to see the performance even higher than advertised at 339MBs:





















Now I am looking forward to seeing what 12 of those in RAID10 and RAID0 will do. Can't beat that for the price.